You are here:
News
News
Pressure Reducing Valves 2011-11-16
Pressure reducing valves can help to reduce water hammer in many instances. But they can also be the source of noise in certain cases. They must be sized properly.
The size of the valve 2011-09-23
In the
petroleum, petrochemical, chemical, power, urban construction, the operating temperature of 200 degrees in the piping system can use metal
to metal sealing ball valve.
1:Determine the size
Gate valve with paint 2011-09-20
If you
spot some you can use a wire brush to scrape the rust off of the metal.
It is also a great idea to paint the steel
gate valve with paint that
protects metal against rust. You need to remove t
New ball valve is suitable for below-ground 2011-09-19
Asahi/America's new ball valve is suitable for below-ground
service, and valves larger than 2" are available with an integrated gear
box. The SDR11 spigot ends are approved for maximum operating
pr
Water filtration system 2011-09-05
A high-fiber filter to the quartz fiber filter and sand filter media, compared with high filtration efficiency, filtration rate is fast, interception capacity, large amount of water cycle system, sinc
The diaphragms and there drive 2011-09-02
Then control based on the number of strokes, or time which ever is easier for you. The diaphragm pump is not going to give you what you want. Maybe you could fill an intermediate tank from the t
Idea for a cheap simple wet UFH layout 2011-09-01
Idea for a cheap simple wet UFH layout & control system?
I wonder if anyone can advise me on some questions that I cannot find mentioned anywhere on the web for an simple wet UFH project.
I have
