Pressure Reducing Valves (PRVs) Series

Product drawing»

Structural drawing»

You are here: News

News

Non-variable Reducing Valves Operation 2010-12-02
Non-variable reducing valves, illustrated in Figure below, replace the adjusting spring and screw with a pre-pressurized dome over the diaphragm.
Standard Document for Instrument Relief Valves 2010-12-01
What is the intent of your relief device, is it intended for safety reasons or just pressure control?
Proportional flow valves 2010-12-01
Solenoid pneumatic 2/2 control valves to a proportional flow pneumatic valve. I was hoping to use a range of 0-5V to determine the flow rate of the valve.
Viscosity effect on Relief Valves 2010-12-01
The fluid is highly viscous (6,000-7,000 centipoise at 70F) and the flow is low (0.55 gpm). The fluid is 10% NaOH and 90% wetted cellulose in water and has a specific gravity of 1.12.
INSTALLING VALVES 2010-12-01
It does depend on the type of valve and actuator. If you tell me what kind I can get specific.
Pressure Reducing & Relief Valve 2010-11-30
There is a formal answer and a less formal answer.Informally, if your only purpose is to test the performance of a pump and not to protect from overpressure failure
Various Pressure Ratings Vs Working Pressure/Testing Pressure 2010-11-30
Can help in giving the full working pressure for various pressure classes such as:
choke valve as PRV 2010-11-30
Just looking for thoughts on using a 'control choke' as a pressure reducing valve- max pressure expected to be 475 psi.
Kaiweixi Valve Group Co., Ltd.
Kaiweixi pressurereduce valve Contact Kaiweixi
 Zhejiang Shanliu Valve Technology Co., Ltd.
Shanliu pressurereduce valve Contact Shanliu
Shanghai Fengqi Industrial Development Co., Ltd.
FengQi pressurereduce valve Contact FengQi
Shanghai MeiYan Yi Pump & Valve Co., Ltd.
MeiYan Yi pressurereduce valve Contact MeiYan Yi