You are here:
News
News
YK43X Pilot-Operated Piston Pressure Reducing Valve Demonstrates Outstanding Performance 2026-03-30
As a technically mature pilot-operated gas pressure reducing valve, the core advantage of the YK43X lies in its high-precision pressure stabilization capability. The valve adopts a pilot-operated stru
Maintenance Procedure for Pressure Reducing Valve 25P 2026-03-26
Regularly inspect the valve body for cracks, corrosion, or leakage. Check whether the fastening bolts are loose and whether the pressure gauge is functioning properly. After shutting down and relievin
Water Pressure Reducing Valve: The Core of Stability, Water Conservation, and System 2026-03-19
The water pressure reducing valve is a device that lowers and stabilizes water pressure by automatically adjusting local resistance. Its unique features extend beyond basic pressure reduction, primari
Y42X Direct-acting Spring Pressure Reducing Valve: Structure and Advantages 2026-03-12
In the field of industrial fluid control, the Y42X direct-acting spring pressure reducing valve has become the preferred choice for medium and low-pressure applications due to its simple and reliable
Pressure Reducing Valve is a Self-Operated Regulating Valve 2026-03-09
The pressure reducing valve is a self-operated regulating valve that reduces the inlet pressure to the required outlet pressure through throttling by its internal components. When the inlet pressure a
Selection Criteria for Pressure Reducing Valves 2026-03-05
1. Within the given spring pressure range, the outlet pressure shall be continuously adjustable between the maximum and minimum values, without any jamming or abnormal vibration.
Impact of Large Steam Flow Fluctuations on Pressure Reducing Valves 2026-02-26
1. Problems with Sizing for Maximum Flow
When the load is very low, the main valve operates at a minimal opening for extended periods. This leads to: ① The piston stroke is concentrated in a small ar
How to Extend the Service Life of Condensate Pumps Using Pressure Regulating Valves 2026-02-09
When setting the drive pressure for a mechanical pump, the correct method is to set it 1-1.5 kg/cm² (15-20 psig) above the back pressure. This is appropriate in most cases. However, sometimes, to mee
