You are here:
News
News
A gas pressure-reducing valve 2011-11-18
A gas pressure-reducing valve in which a valve member to be seated on a valve seat having a valve hole opened at its central portion and leading to a pressure-reducing chamber between a body and a dia
Convert a quarter turn valve into a relief valve 2011-11-17
Buckling pin pilots by Rupture Pin Technology can control readily available actuated ball and butterfly valves. These valves can incorporate chemical compatibility with no size or pressure limit.
Installing a Pressure Reducing Valve 2011-11-16
The first thing you have to realize when installing a pressure reducing valve is that these dudes can and do go bad. Replacing a bad valve can be a nightmare if you do not have
valves on either side
Pressure Reducing Valves 2011-11-16
Pressure reducing valves can help to reduce water hammer in many instances. But they can also be the source of noise in certain cases. They must be sized properly.
The size of the valve 2011-09-23
In the
petroleum, petrochemical, chemical, power, urban construction, the operating temperature of 200 degrees in the piping system can use metal
to metal sealing ball valve.
1:Determine the size
Gate valve with paint 2011-09-20
If you
spot some you can use a wire brush to scrape the rust off of the metal.
It is also a great idea to paint the steel
gate valve with paint that
protects metal against rust. You need to remove t
New ball valve is suitable for below-ground 2011-09-19
Asahi/America's new ball valve is suitable for below-ground
service, and valves larger than 2" are available with an integrated gear
box. The SDR11 spigot ends are approved for maximum operating
pr
Water filtration system 2011-09-05
A high-fiber filter to the quartz fiber filter and sand filter media, compared with high filtration efficiency, filtration rate is fast, interception capacity, large amount of water cycle system, sinc
